Front Fog Lamp Replacement

Front Fog Lamp Replacement

Removal Procedure

1. Remove the wheelhouse panel. Refer to Wheelhouse Panel Replacement - Left Side (Service and Repair) .




2. Disconnect the electrical connector from the bulb/socket (2).
3. Remove the nuts (3) attaching front fog lamp (1) to the front fascia.
4. Remove the fog lamp (1) from the fascia.
5. Remove the bulb/socket from fog lamp. Refer to Front Fog Lamp Bulb Replacement (Service and Repair) .



Installation Procedure

1. Install the bulb/socket to fog lamp. Refer to Front Fog Lamp Bulb Replacement (Service and Repair) .




2. Install the fog lamp (1) to the fascia.

Notice: Refer to Fastener Notice (Fastener Notice) .

3. Install fog lamp nuts (3).

Tighten the nuts to 6 N.m (53 lb in).

4. Connect the fog lamp electrical connector to the bulb/socket (2).
5. Inspect the fog lamp for proper operation.
6. Install the wheelhouse panel. Refer to Wheelhouse Panel Replacement - Left Side (Service and Repair) .
7. Aim the fog lamp. Refer to Fog Lamp Aiming (Procedures) .