Traction Control Switch: Service and Repair

Electronic Traction Control Switch Replacement

Removal Procedure





1. Turn the ignition switch to the OFF position.
2. Remove the center console trim plate. Refer to Console Trim Plate Replacement (Service and Repair) .
3. Disconnect the harness electrical connector from the traction control switch.
4. Depress the retaining tabs on the traction control switch and remove the traction control switch (1) .



Installation Procedure





1. Insert the traction control switch into the center console trim plate (1).
2. Connect the harness electrical connector to the traction control switch .
3. Install the center console trim plate. Refer to Console Trim Plate Replacement (Service and Repair) .