Power Mirror Motor: Service and Repair

Outside Rearview Mirror Motor Replacement

Removal Procedure




1. Remove the mirror face. Refer to Outside Rearview Mirror Glass Replacement (Outside Rearview Mirror Glass Replacement).
2. Remove the screws (2).
3. Disconnect the electrical connector.

Installation Procedure




1. Connect the electrical connector.
2. Align the motor to the mirror assembly.

Caution: Refer to Fastener Caution (Fastener Caution).

3. Install the screws (2) and tighten to 1 Nm (9 lb in).
4. Install the mirror face. Refer to Outside Rearview Mirror Glass Replacement (Outside Rearview Mirror Glass Replacement).