Crankshaft, Engine

Crankshaft End Play 0.100-0.330 mm (0.0039-0.0130 in)

Crankshaft Main Journal Diameter 67.992-68.008 mm (2.6768-2.6775 in)

Crankshaft Main Journal Out-of-Round 0.005 mm (0.0002 in)

Crankshaft Main Journal Taper 0.005 mm (0.0002 in)

Crankshaft Main Journal Thrust Wall

Runout 0.000-0.040 mm (0.0000-0.0016 in)
Square 0.000-0.010 mm (0.0000-0.0004 in)

Crankshaft Main Journal Width, #2, 4

Production 24.000 mm (0.9449 in)
Service 23.900-24.100 mm (0.9409-0.9488 in)

Crankshaft Main Journal Width, #3

Production 24.400 mm (0.9606 in)
Service 24.360-24.440 mm (0.9591-0.9622 in)

Crankshaft Pilot Bearing Bore Diameter 20.965-20.995 mm (0.8254-0.8266 in)

Crankshaft Rear Flange Runout 0.025 mm (0.0010 in)

Crankshaft Reluctor Ring Runout - Maximum 1.500 mm (0.0591 in)

Crankshaft Runout 0.030 mm (0.0012 in)

Crankshaft Thrust Bearing Clearance 0.076-0.305 mm (0.0030-0.0120 in)

Crankshaft Thrust Surface - Height Diameter 95.000 mm (3.7401 in)

Crankshaft Thrust Surface Runout 0.040 mm (0.0016 in)