Cylinder Head Assembly

CYLINDER HEAD BOLT

Right Sequence:

Left Sequence:

Cylinder Head Bolt - M8
First pass 15 Nm (11 lb ft)
Final pass 75 degrees

Cylinder Head Bolt - M11
First pass 30 Nm (22 lb ft)
Final pass 150 degrees

NOTE: DO NOT allow oil on the cylinder head bolt bosses. DO NOT reuse the old cylinder head bolts.

INTAKE MANIFOLD

(DI):

Upper-to-Lower Intake Manifold Bolt 23 Nm (17 lb ft)

CAMSHAFT BEARING CAP

Right (SFI):

Left (SFI):

Right (DI):

Left (DI):

Camshaft Cap Bolt 10 Nm (89 lb in)

EXHAUST MANIFOLD

Bolt 20 Nm (15 lb ft)