Engine Block Valley Cover Replacement
Engine Block Valley Cover Replacement
Removal Procedure
1. Remove the supercharger. Refer to Supercharger Replacement (Supercharger Replacement).
2. Remove the oil pressure switch. Refer to Engine Oil Pressure Sensor and/or Switch Replacement (Service and Repair).
3. Remove the engine valley retaining bolts (1).
4. Remove the engine valley cover (2).
5. Remove the engine valley gasket (3).
6. Remove the O-rings (4) from the engine valley cover (2).
Installation Procedure
1. Install the O-rings (4) to the engine valley cover (2).
2. Install the engine valley gasket (3).
3. Install the engine valley cover (2).
4. Install the retaining bolts (1).
Caution: Refer to Fastener Caution (Fastener Caution).
5. Tighten the engine valley retaining bolts to 25 Nm (18 lb ft).
6. Install the supercharger. Refer to Supercharger Replacement (Supercharger Replacement).
7. Install the oil pressure switch. Refer to Engine Oil Pressure Sensor and/or Switch Replacement (Service and Repair).