Camshaft Position Actuator Replacement - Bank 1 (Right Side) Intake

Camshaft Position Actuator Replacement - Bank 1 (Right Side) Intake

Removal Procedure





1. Remove the right exhaust camshaft actuator. Refer to Camshaft Position Actuator Replacement - Bank 1 (Right Side) Exhaust (Camshaft Position Actuator Replacement - Bank 1 (Right Side) Exhaust).

2. Remove the intake camshaft position actuator bolt.

3. Remove the right intake camshaft position actuator.

Installation Procedure




1. Locate the intake camshaft position actuator to the camshaft and loosely install the bolt.

Caution: Refer to Torque Reaction Against Timing Drive Chain Caution (Service Precautions).

Note: Use an open-end wrench at the camshaft hex to prevent camshaft/engine rotation.

2. Tighten the camshaft position actuator bolt. 107. Camshaft Position Actuator Installation - Right Side Intake

3. Install the right exhaust camshaft actuator. Refer to Camshaft Position Actuator Replacement - Bank 1 (Right Side) Exhaust (Camshaft Position Actuator Replacement - Bank 1 (Right Side) Exhaust).