Inside Air Temperature Sensor Aspirator Replacement

Inside Air Temperature Sensor Aspirator Replacement

Removal Procedure

1. Remove the I/P cluster trim panel. Refer to Instrument Cluster Trim Panel Replacement (Service and Repair).




2. Remove the knee bolster reinforcement. Refer to Driver Knee Bolster Reinforcement Replacement (Service and Repair).
3. Disconnect the aspirator hose from the HVAC module.
4. Disconnect the aspirator hose from the inside air temperature sensor.
5. Remove the aspirator hose.

Installation Procedure




1. Install the aspirator hose.
2. Connect the aspirator hose to the inside air temperature sensor.
3. Connect the aspirator hose to the HVAC module.
4. Install the knee bolster reinforcement. Refer to Driver Knee Bolster Reinforcement Replacement (Service and Repair).
5. Install the I/P cluster trim panel. Refer to Instrument Cluster Trim Panel Replacement (Service and Repair).