Fan Replacement (With V92)

Fan Replacement (LH2 With V92) (4.6L)

Special Tools

J 41240 Fan Clutch Remove and Installer

Removal Procedure




1. Remove the air cleaner intake duct. Refer to Air Cleaner Outlet Duct Replacement (Service and Repair).

Note:
* The fan nut has left hand (reverse) threads.
* Do not completely remove the fan from the crank adapter shaft.

2. Loosen the fan nut from the crank adapter shaft using J 41240 .
3. Remove the fan shroud. Refer to Engine Coolant Fan Shroud Replacement (LH2 With V92) (Service and Repair)Engine Coolant Fan Shroud Replacement (LH2 Without V92, LLT) (Service and Repair)Engine Coolant Fan Shroud Replacement (LC3, LY7) (Service and Repair).
4. Continue to loosen the fan nut and disconnect the fan from the crank adapter shaft.
5. Remove the fan from the vehicle.

Installation Procedure





Note: The fan nut has left hand (reverse) threads.

1. Install the fan to the vehicle.
2. Connect the fan to the crank adapter shaft.
3. Install the fan shroud. Refer to Engine Coolant Fan Shroud Replacement (LH2 With V92) (Service and Repair)Engine Coolant Fan Shroud Replacement (LH2 Without V92, LLT) (Service and Repair)Engine Coolant Fan Shroud Replacement (LC3, LY7) (Service and Repair).

Caution: Refer to Fastener Caution (Fastener Caution).

4. Tighten the fan nut to the crank adapter shaft using J 41240 to 100 Nm (74 lb ft).
5. Install the air cleaner intake duct. Refer to Air Cleaner Outlet Duct Replacement (Service and Repair).