Oil Level Sensor: Service and Repair

Engine Oil Level Sensor and/or Switch Replacement

Removal Procedure




1. Drain the engine oil. Refer to Engine Oil and Oil Filter Replacement (Service and Repair).
2. Disconnect the electrical connector from engine oil level switch.
3. Remove the engine oil level switch from the oil pan.

Installation Procedure




1. Install the engine oil level switch to the oil pan.

Caution: Refer to Fastener Caution (Fastener Caution).

2. Install the engine oil level switch bolt and tighten to 10 Nm (89 lb in).
3. Connect the electrical connector to engine oil level switch.
4. Fill the engine oil. Refer to Engine Oil and Oil Filter Replacement (Service and Repair).
5. Inspect for oil leaks after engine start up.