Connecting Rod: Specifications

Connecting Rod Bolt
First Pass 30 Nm (22 lb ft)
Second Pass Back off to zero
Third Pass 25 Nm (18 lb ft)
Final Pass 110 degrees

Connecting Rod Bore Diameter - Bearing End 57.136-57.152 mm (2.2495-2.2501 in)
Connecting Rod Bore Diameter - Pin End 24.006-24.018 mm (0.9451-0.9456 in)
Connecting Rod Bore Out-of-Round - Bearing End 0.006 mm (0.0002 in)
Connecting Rod Bore Out-of-Round - Pin End 0.005 mm (0.0002 in)
Connecting Rod Length Center to Center 151.00 mm (5.9449 in)