Cowl Moulding / Trim: Service and Repair

Air Inlet Grille Panel Replacement

Removal Procedure

1. Open the hood.
2. Remove the windshield wiper arms. Refer to Windshield Wiper Arm Replacement (Service and Repair).




3. Remove the push-in retainers (1) securing the air inlet grille panel (2) to the vehicle.
4. Disconnect the washer hose connector.
5. Remove the retainers (3) securing the sides of the grille panel to the fenders.
6. Remove the air inlet grille panel (2) from the vehicle.

Installation Procedure




1. Position the air inlet grille panel (2) to the vehicle.
2. Connect the washer hose connector.
3. Install the grille panel with the tabs under the edge of the windshield.
4. Install the retainers (3) securing the sides of the grille panel to the fenders.
5. Install the push-in retainers (1) securing the grille panel (2) to the vehicle.
6. Install the windshield wiper arms. Refer to Windshield Wiper Arm Replacement (Service and Repair).
7. Close the hood.