Operation CHARM: Car repair manuals for everyone.

121. Ignition Coil Module Installation - Right Side




Ignition Coil Module Installation - Right Side





Caution: Refer to Fastener Caution (Fastener Caution).

1. Install the right spark plugs.

Tighten the spark plugs to 15 Nm (11 lb ft).




2. Apply a small amount of dielectric grease GM P/N 12345579, (Canadian P/N 1974984), to each spark plug boot (1) of the ignition coil assembly.




3. Carefully, install the right ignition coil assembly.




4. Install the ignition coil assembly bolts (708) and ball studs (709).

Tighten the right ignition coil assembly bolts (708) and ball studs (709) to 10 Nm (89 lb in).