Evaporator Drain Tube: Service and Repair

Evaporator Drain Tube Replacement

Removal Procedure

1. Remove the intake manifold. Refer to Intake Manifold Replacement (Service and Repair).
2. Remove the engine wire harness bracket bolt.
3. Disconnect engine wire harness electrical connector and reposition aside.




4. Remove the HVAC module drain tube (1) from the HVAC module.

Installation Procedure

Note: Ensure that the HVAC module drain tube is fully seated onto the HVAC module.




1. Install the HVAC module drain tube (1) to the HVAC module.
2. Connect engine wire harness electrical connector.

Caution: Refer to Fastener Caution (Fastener Caution).

3. Install the engine wire harness bracket bolt and tighten to 10 Nm (89 lb in).
4. Install the intake manifold. Refer to Intake Manifold Replacement (Service and Repair).