Daytime Running Lamp: Service and Repair

Daytime Running Lamp (DRL) Ambient Light Sensor Replacement

Removal Procedure

1. Remove the instrument panel (I/P) trim pad. Refer to Instrument Panel Trim Pad Replacement (Service and Repair).




2. Disconnect the electrical connector to the ambient light sensor.
3. Twist to release the daytime running lamps (DRL) sensor from the I/P trim pad.

Installation Procedure




1. Twist to secure the DRL sensor to the I/P trim pad
2. Connect the electrical connector to the DRL sensor.
3. Install the I/P trim pad. Refer to Instrument Panel Trim Pad Replacement (Service and Repair).