Rear Camber Adjustment

Rear Camber Adjustment

Removal Procedure

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (Service and Repair).
2. Remove the tire and wheel assemblies. Refer to Tire and Wheel Removal and Installation (Service and Repair).




3. Using a back-up wrench to prevent the link stud from rotating, remove the stabilizer shaft link nuts from the lower control arms.
4. Using a back-up wrench to prevent the link stud from rotating, remove the stabilizer shaft link nuts and links from the shaft.

Installation Procedure





Caution: Refer to Fastener Caution (Fastener Caution)

1. Using a back-up wrench to prevent the link stud from rotating, install the stabilizer shaft links and link nuts and tighten to 60 Nm (44 lb ft) + 30°.
2. Install the tire and wheel assemblies. Refer to Tire and Wheel Removal and Installation (Service and Repair).
3. Lower the vehicle.