Driver Seat Cushion Ventilation Heating and Cooling Module Replacement

Driver Seat Cushion Ventilation Heating and Cooling Module Replacement

Removal Procedure

1. Remove the seat cover and cushion. Refer to Driver Seat Cushion Pad Replacement (Driver Seat Cushion Pad Replacement).
2. Disconnect the electrical connector to the ventilation module.
3. Cut the tie strap to the ventilation duct.




4. Remove the retaining screw from the ventilation module to the seat cushion wire frame.
5. Remove the ventilation module from the seat.

Installation Procedure




1. Install the ventilation module to the seat cushion wire frame.

Caution: Refer to Fastener Caution (Fastener Caution).

2. Install the retaining screw to the ventilation module and tighten to 2.5 Nm (22 lb in).
3. Connect the electrical connector to the ventilation module.
4. Install the ventilation duct to the ventilation module and tie with a new strap.
5. Install the seat cover and cushion. Refer to Driver Seat Cushion Pad Replacement (Driver Seat Cushion Pad Replacement).