Active Exhaust System Control Module: Service and Repair

Exhaust Tail Pipe Flow Valve Control Module Replacement

Removal Procedure

1. Remove the battery.




2. Disconnect both electrical connectors.
3. Detach the exhaust tail pipe flow valve control module by pulling off two-sided tape.




4. Remove the exhaust tail pipe flow valve control module.

Installation Procedure




1. Install the exhaust tail pipe flow valve control module.
2. Attach the exhaust tail pipe flow valve control module using a new piece of two-sided tape.




3. Connect both electrical connectors.
4. Install the battery.
5. Refer to Control Module References (Programming and Relearning) for programming and setup information.