Inflatable Restraint Side Impact Sensor Replacement
Inflatable Restraint Side Impact Sensor Replacement
Removal Procedure
1. Disable the SIR system. Refer to SIR Disabling and Enabling (Service and Repair).
2. Remove the door trim panel. Refer to Door Trim Panel Replacement (Service and Repair).
3. Remove the retaining bolts from the inflatable restraint side impact sensor.
4. Remove the sensor from the vehicle.
Installation Procedure
1. Install the sensor from the vehicle.
Caution: Refer to Fastener Caution (Fastener Caution).
2. Install the retaining bolts to the inflatable restraint side impact sensor and tighten to 9 Nm (80 lb in).
3. Install the door trim panel. Refer to Door Trim Panel Replacement (Service and Repair).
4. Enable the SIR system. Refer to SIR Disabling and Enabling (Service and Repair).