Parking Brake Warning Switch: Service and Repair

Parking Brake Indicator Switch Replacement

Removal Procedure

1. Remove the LH closeout trim panel. Refer to Instrument Panel Insulator Panel Replacement - Left Side (Service and Repair).
2. Remove the instrument cluster. Refer to Instrument Cluster Replacement (Instrument Cluster Replacement).




3. Remove the park brake assembly attaching nuts (1) and bolt (2).




4. Disconnect the park brake switch electrical connector.
5. Disconnect the park brake release solenoid electrical connector.
6. Position the park brake pedal assembly aside to gain access to the park brake warning lamp switch.
7. Remove the park brake warning lamp switch retainer.
8. Remove the park brake warning lamp switch from the park brake pedal assembly.

Installation Procedure

1. Install the park brake warning lamp switch to the park brake assembly.

Caution: Refer to Fastener Caution (Fastener Caution).

2. Install the park brake warning lamp switch retainer and tighten to 3 Nm (27 lb in).
3. Position the park brake pedal assembly.
4. Install the park brake pedal assembly retaining nuts and bolt and tighten to 10 Nm (89 lb in).
5. Connect the park brake release solenoid electrical connector.




6. Connect the park brake switch electrical connector.
7. Install the instrument cluster. Refer to Instrument Cluster Replacement (Instrument Cluster Replacement).
8. Install the LH closeout trim panel. Refer to Instrument Panel Insulator Panel Replacement - Left Side (Service and Repair).
9. Apply the park brake pedal and release 2-3 times, to ensure proper function of the park brake system.