Cylinder Head Assembly

Cylinder head bolts

Left Sequence:

Right Sequence:

DO NOT reuse the old cylinder head bolts
M11 bolts (1) first pass 30 Nm (22 lb ft)
M11 bolts (1) second pass 150 degrees
M8 bolts (2) first pass 15 Nm (11 lb ft)
M8 bolts (2) second pass 75 degrees

Warpage less than 0.05 mm (0.002 in)





Intake manifold 23 Nm (17 lb ft)

Camshaft bearing caps

Right (DI):

Left (DI):

Tighten to 10 Nm (89 lb in)
Loosen center intake bearing cap bolts (1, 2)
Loosen center intake bearing cap bolts (3, 4)
Tighten center bearing cap bolts (1, 2, 3, 4)
Retighten bearing cap bolts 10 Nm (89 lb in)

Exhaust manifold 20 Nm (15 lb ft)