15. Transmission Case Assemble

Transmission Case Assemble

Special Tools
* DT-47722 - Shift Rail Bushing Remover and Installer
* DT-47725 - Extension Housing Bearing Cup Installer
* DT-47726 - Countershaft Rear Bearing Installer

Rear Case Assemble





Note: Ensure that the rear case housing installation surfaces are free of dirt and sealant.

1. Apply gear oil to new bearing. Use DT-47726 - installer to install new bearing (138).





Caution: Refer to Fastener Caution (Fastener Caution).

2. Install the bearing retainer (21) and bolt (38) and tighten to 11.3 Nm (100 lb in).
3. Install the gasket (29).




4. Install the oil trough (17).




5. Using DT-47722 - remover/installer , install the bearing (25) in the rear case.




6. Using DT-47725 - installer , install the tapered bearing race (139).

Middle Case Assemble





Using DT-47722 - remover/installer , install the bearing (8) in the middle case.