Oil Pump Outlet Tube Replacement

Oil Pump Outlet Tube Replacement

Special Tools

J 39946 Crankshaft Socket

Removal Procedure

1. Remove the oil pump. Refer to Oil Pump Replacement (Oil Pump Replacement).




2. Align the primary timing marks (1) using the J 39946.
3. Remove the secondary camshaft drive chains. Refer to Secondary Camshaft Intermediate Drive Chain Replacement - Right Side (Secondary Camshaft Intermediate Drive Chain Replacement - Right Side) and Secondary Camshaft Intermediate Drive Chain Replacement - Left Side (Secondary Camshaft Intermediate Drive Chain Replacement - Left Side).
4. Remove the primary drive chain tensioner. Refer to Primary Camshaft Intermediate Drive Chain Tensioner Replacement (Primary Camshaft Intermediate Drive Chain Tensioner Replacement).




5. Remove the oil outlet tube bolts (1-5).
6. Remove the oil outlet tube.




7. Remove and discard the oil outlet tube O-ring.
8. Clean and inspect the oil outlet tube.

Installation Procedure




1. Install a NEW O-ring on the oil outlet tube.





Caution: Refer to Fastener Caution (Fastener Caution).

2. Install the oil outlet tube and bolts.

Tighten the oil outlet tube bolts to 10 Nm (89 lb in).




3. Ensure the primary timing marks (1) are aligned vertically.
4. Install the primary drive chain tensioner. Refer to Primary Camshaft Intermediate Drive Chain Tensioner Replacement (Primary Camshaft Intermediate Drive Chain Tensioner Replacement).
5. Install the secondary camshaft drive chains. Refer to Secondary Camshaft Intermediate Drive Chain Replacement - Left Side (Secondary Camshaft Intermediate Drive Chain Replacement - Left Side) and Secondary Camshaft Intermediate Drive Chain Replacement - Right Side (Secondary Camshaft Intermediate Drive Chain Replacement - Right Side).
6. Install the oil pump. Refer to Oil Pump Replacement (Oil Pump Replacement).