23. Camshaft Cover Removal - Right Side

Camshaft Cover Removal - Right Side

Tools Required

J 44212 Camshaft Holding Tool




1. Remove the right camshaft cover ignition coil ground strap bolt.
2. Remove the right cylinder head ignition coil ground strap bolt.
3. Remove the right ignition coil ground strap.




4. Remove the camshaft cover bolts.
5. Remove and discard the camshaft cover grommets and camshaft cover bolts if they are serviced with the grommet.
6. Lift the camshaft cover from the cylinder head.




7. Install the J 44212 to the right cylinder head camshafts.