Front Object Alarm Sensor Replacement

Front Object Alarm Sensor Replacement

Removal Procedure




1. Remove front bumper fascia. Refer to Front Bumper Fascia Replacement (Front Bumper Fascia Replacement).
2. Disconnect electrical from the front object sensor.
3. Lift the locking tabs on the housing and remove the front object sensor.

Installation Procedure





Note: Ensure the silicone decoupling ring is installed on the sensor to avoid sensor failure.

1. Insert the sensor into the housing.
2. Connect the electrical connector to the front object sensor.
3. Install the front bumper fascia. Refer to Front Bumper Fascia Replacement (Front Bumper Fascia Replacement).