VIN Y

Crankshaft Main Bearing Bore Diameter 72.430-72.442 mm (2.8516-2.8521 in)
Crankshaft Main Bearing Bore Out-of-Round 0.010 mm (0.0004 in)
Crankshaft Main Bearing Clearance
Production 0.0150-0.0550 mm (0.0006-0.0022 in)
Service 0.0150-0.0635 mm (0.0006-0.0025 in)
Crankshaft Main Journal Diameter 64.350-64.366 mm (2.5335-2.5341 in)
Crankshaft Main Journal Out-of-Round 0.005 mm (0.0002 in)
Crankshaft Main Journal Taper 0.005 mm (0.0002 in)

Lower crankcase





Main bearing bolts (1-20)
First pass 20 Nm (15 lb ft)
Final pass 65 degrees





Perimeter bolts 30 Nm (22 lb ft)