Connecting Rod, Engine

Connecting Rod Bolts
Replace bolts
Tighten the connecting rod bolts 30 Nm (22 lb ft)
Loosen to torque reading of zero.
First pass 25 Nm (18 lb ft)
Final Pass
Tighten the connecting rod bolts an additional 110 degrees using the J 45059 - meter.

Connecting Rod
Side clearance 0.200-0.500 mm (0.0079-0.0197 in)
Out of round
Bearing end 0.006 mm (0.0002 in)
Pin end 0.005 mm (0.0002 in)
Diameter
Bearing end 57.136-57.152 mm (2.2495-2.2501 in)
Pin end 23.002-23-014 mm (0.9056-0.9061 in)