Rear Seat Cushion Replacement

Rear Seat Cushion Replacement

Removal Procedure

Warning: Refer to SIR Warning (SIR Warning).





1. Push in and pull up on the front of the rear seat cushion.
2. Lift up and out on the seat cushion.
3. Remove the rear seat cushion from the vehicle.

Installation Procedure




1. Install the rear seat cushion into the vehicle.
2. Engage the center wire hook, on the back of the seat cushion, under the seat back frame.
3. Position the rear seat buckles in the slots of the rear seat cushion.
4. Push down and rearward to seat the rear seat cushion into the latches in the number 4 bar.
Note: Pull up on the front of the rear seat cushion to ensure that the cushion is secure.