Instrument Cluster / Carrier: Service and Repair

Instrument Cluster Replacement

Removal Procedure

1. Remove the instrument panel cluster trim. Refer to Instrument Cluster Trim Panel Replacement (Instrument Cluster Trim Panel Replacement).




2. Remove the 4 screws (1) securing the instrument panel cluster.
3. Disconnect the electrical connector.

Installation Procedure




1. Connect the electrical connector.

Caution: Refer to Fastener Caution (Fastener Caution).

2. Install the 4 screws (1) securing the instrument panel cluster.

Tighten the screws (1) to 2 Nm (9 lb in).

3. Install the instrument panel cluster trim. Refer to Instrument Cluster Trim Panel Replacement (Instrument Cluster Trim Panel Replacement).
4. Refer to Control Module References (Programming and Relearning) for programming and setup information.