Parking Brake Warning Switch: Service and Repair

Parking Brake Indicator Switch Replacement (LHD)

Removal Procedure




1. Remove the left instrument panel insulator panel. Refer to Instrument Panel Insulator Panel Replacement - Left Side (Instrument Panel Insulator Panel Replacement - Left Side).
2. Disconnect the electrical connector from the park brake indicator switch.
3. Remove the park brake indicator switch retaining bolt.
4. Remove the park brake indicator switch.

Installation Procedure




1. Install the park brake indicator switch to the park brake lever assembly. Align the locator pin to the locator hole.

Caution: Refer to Fastener Caution (Fastener Caution).

2. Install the park brake indicator switch retaining bolt and tighten to 2 Nm (18 lb in).
3. Connect the park brake indicator switch electrical connector to the park brake warning lamp switch.
4. Install the left instrument panel insulator panel. Refer to Instrument Panel Insulator Panel Replacement - Left Side (Instrument Panel Insulator Panel Replacement - Left Side).