126. Water Pump Installation
Water Pump Installation
Special Tools
EN 46104 - Water Pump Pulley Holding Tool
For equivalent regional tools, refer to Special Tools (Special Tools).
1. Ensure that the engine front cover and water pump are clear of old gasket material.
2. Place a new water pump gasket on the water pump.
3. Place the water pump in position on the front cover.
Caution: Refer to Fastener Caution (Fastener Caution).
4. Install the water pump bolts and tighten to 10 Nm (89 lb in).
5. Install the water pump pulley.
6. Loosely install the water pump pulley bolts.
7. Install the EN 46104 - tool (1) onto the water pump pulley and tighten the water pump pulley bolts to 10 Nm (89 lb in)
.