Catalyst Shield: Service and Repair

Catalytic Converter Heat Shield Replacement

Removal Procedure
Warning: Refer to Exhaust Service Warning (Exhaust Service Warning).

Warning: Refer to Protective Goggles and Glove Warning (Protective Goggles and Glove Warning).






Warning

Eye protection must be worn when drilling rivets to reduce the chance of personal injury.

1. Remove the exhaust system. Refer to Exhaust System Replacement (Service and Repair).
2. Drill out the heat shield rivets (2).
3. Remove the heat shield.

Installation Procedure




1. Position the heat shield to the floor panel.
2. Using a rivet gun, install the rivets (2), except for this location (1), this rivet will be installed with the oxygen sensor heat shield.
3. Install the exhaust system. Refer to Exhaust System Replacement (Service and Repair).