Vehicle Direction Alert Alarm Warning Module Programming and Setup

Vehicle Direction Alert Alarm Warning Module Programming and Setup

After replacing the vehicle direction alert alarm warning (VDAAW) module, perform the following procedures in the specified order:

Important: When using SPS to program the VDAAW, connect the vehicle to the TIS terminal using a Tech 2 and Candi module. Using the MDI to SPS program the VDAAW will result in a failure to complete the programming operation.


1. SPS Programming - Refer to Service Programming System (SPS) (Service Programming System (SPS))
2. VDAAW Module Calibration - Refer to Vehicle Direction Alert Alarm Warning Module Calibration (Vehicle Direction Alert Alarm Warning Module Calibration)