Cylinder Head Assembly

Cylinder Head Bolt (M11)

Left:

Right:

First Pass 30 Nm (22 lb ft)
Second Pass +60 degrees
Third Pass +60 degrees
Final Pass +60 degrees/180 degrees Total

Cylinder Head Bolt (M6) 12 Nm (106 lb in)

Note: DO NOT reuse the M11 cylinder head bolts.

Surface Flatness

Cylinder Head
Block Deck 0.050 mm (0.0020 in)

Block
Cylinder Head Deck 0.100 mm (0.0039 in)

Exhaust Manifold Deck 0.220 mm (0.0087 in)
Intake Manifold Deck 0.220 mm (0.0087 in)

Camshaft Bearing Cap Bolt

Left Exhaust:

Left Intake:

Right Exhaust:

Right Intake:

First Pass 5 Nm (44 lb in)
Final Pass +30 degrees

Intake Manifold Specifications

Exhaust Manifold Specifications

Camshaft Gear/Sprocket Specifications