35. Reverse Clutch Housing and Second Sprag Disassemble

Reverse Clutch Housing and Second Sprag Disassemble

Special Tools

J 39694 - Spring Compressor

For equivalent regional tools, refer to Special Tools (Tools and Equipment).




1. Remove the spiral snap ring (519). Discard the snap ring, which is not reusable.
2. Remove the following parts:

* The sprag clutch retainer (518)
* The second sprag outer race
* The second sprag clutch (516-517)
* The second sprag outer race thrust washer (520)




3. Remove the following parts:

* The reverse clutch snap ring (515)
* The reverse clutch backing plate (512)
* All of the fiber (513) and steel (511) clutch plates
* The reverse clutch waved plate (514)




4. Install the J 39694 - spring compressor spring compressor and compress the spring and retainer assembly (509). Then remove the snap ring (510).




5. Remove the following parts:

* The snap ring retainer (509)
* The spring and retainer assembly (508)
* The piston assembly (505)