Door Lock Control Module Replacement

Door Lock Control Module Replacement

Removal Procedure

1. Remove the door trim panel. Refer to Rear Side Door Trim Panel Replacement (Rear Side Door Trim Panel Replacement) or Front Side Door Trim Panel Replacement (Front Side Door Trim Panel Replacement).




2. Remove the door control module (1) by releasing the retainer tabs (2).




3. Disconnect the electrical connectors (1) from the control module (2).

Installation Procedure




1. Connect the electrical connectors (1) to the control module (2).




2. Snap the door module (1) onto the mounting studs (2).
3. Install the door trim panel. Refer to Rear Side Door Trim Panel Replacement (Rear Side Door Trim Panel Replacement) or Front Side Door Trim Panel Replacement (Front Side Door Trim Panel Replacement).
4. Refer to Control Module References (Programming and Relearning) for programming and setup information.