Turn Signal Multifunction Switch Replacement

Turn Signal Multifunction Switch Replacement

Removal Procedure

Warning: Refer to SIR Warning (SIR Warning).

1. Disable the SIR system. Refer to SIR Disabling and Enabling (Service and Repair).
2. Remove the steering column trim covers. Refer to Steering Column Trim Cover Replacement (Steering Column Trim Cover Replacement).




3. Remove the retaining screws from the multifunction switch.
4. Disconnect the multifunction switch electrical connections.
5. Remove the multifunction switch.

Installation Procedure

1. Connect the multifunction switch electrical connectors.
2. Install the multifunction switch to the steering column.





Caution: Refer to Fastener Caution (Fastener Caution).

3. Install the retaining screws to the multifunction switch and tighten to 7 Nm (62 lb in).
4. Install the steering column trim covers. Refer to Steering Column Trim Cover Replacement (Steering Column Trim Cover Replacement).
5. Enable the SIR system. Refer to SIR Disabling and Enabling (Service and Repair).