Engine Mount Bracket Replacement - Right Side (AWD)

Engine Mount Bracket Replacement - Right Side (AWD)

Removal Procedure




1. Remove the right side engine mount. Refer to Engine Mount Replacement - Right Side (AWD) Service and RepairEngine Mount Replacement - Right Side (RWD) Service and Repair.
2. Remove the front engine mount bracket mounting bolts (1).
3. Remove the rear engine mount bracket mounting bolts (2,).




4. Remove the coolant tube retaining clamp bolt (1).
5. Reposition the coolant tube aside.




6. Remove the engine mount bracket retaining bolt (3) behind the engine coolant tube.
7. Remove the engine mount bracket from the vehicle.

Installation Procedure




1. Install the engine mount bracket to the vehicle.
2. Install but do not tighten the rear engine mount bracket retaining bolts (2).
3. Install but do not tighten the front engine mount bracket retaining bolts (1).

Caution: Refer to Fastener Caution Fastener Caution.

4. Install the engine mount bracket retaining bolt behind the engine coolant tube (3) and tighten to 38 Nm (28 lb ft).
5. Tighten the rear lower engine mount bracket retaining bolts (2) to 38 Nm (28 lb ft).
6. Tighten the front engine mount bracket retaining bolts (1) to 60 Nm (42 lb ft).




7. Install the coolant tube retaining clamp bolt (1) and tighten to 10 Nm (87 in ft).
8. Install the right side engine mount. Refer to Engine Mount Replacement - Right Side (AWD) Service and RepairEngine Mount Replacement - Right Side (RWD) Service and Repair.