79. Oil Pan Assemble (AWD)
Oil Pan Assemble (AWD)
1. Place a 3 mm (0.118 in) bead of RTV sealant, GM P/N 12378521 (Canadian P/N 88901148) or equivalent, on the skid plate mounting surface (1).
2. Install the skid plate.
Caution: Refer to Fastener Caution Fastener Caution.
3. Install the skid plate bolts and tighten to 10 Nm (89 lb in).
4. Install the oil pan drain plug and NEW O-ring seal and tighten to 25 Nm (18 lb ft).
5. Install the NEW oil suction pipe O-ring.
6. Install the oil suction pipe.
7. Install the oil suction pipe bolts and tighten to 10 Nm (89 lb in)..
8. Install the oil pan scraper.
9. Install the oil pan scraper bolts and tighten to 10 Nm (89 lb in).