Rear Camber Adjustment

Rear Camber Adjustment

Special Tools

* J 45845 - Caster and Camber Adjusting Tool
* J 45845-10 - Caster and Camber Adjusting Rod




1. Position the J 45845 - tool and theJ 45845-10 - rod on the lower control arm to the frame.
2. Loosen the lower control arm to frame bolt.

Caution: Refer to Fastener Caution Fastener Caution.

3. Using the J 45845 - tool and theJ 45845-10 - rod , adjust the camber angle until the specifications have been met and tighten the bolt to 165 Nm (122 lb ft).
4. Verify that the camber is still with specifications. Refer to Wheel Alignment Specifications Specifications.
5. Adjust the rear toe. Refer to Rear Toe Adjustment Rear Toe Adjustment.