Battery Negative Cable Extension Cable Replacement

Battery Negative Cable Extension Cable Replacement (6.2L)

Removal Procedure

1. Remove the front compartment side sight shield. Refer to Front Compartment Side Sight Shield Replacement .
2. Disconnect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection (Sedan,Wagon) Service and RepairBattery Negative Cable Disconnection and Connection (Coupe) Service and Repair.




3. Remove the battery negative extension cable ground bolt (1).
4. Lift the vehicle. Refer to Lifting and Jacking the Vehicle Service and Repair.




5. Remove the battery negative extension cable engine ground bolt (1).
6. Note the routing of the battery negative extension cable (2) and remove it from the vehicle.

Installation Procedure




1. Position the battery negative extension cable cable (2) to the vehicle.

Caution: Refer to Fastener Caution Fastener Caution.

2. Install the battery negative extension cable engine ground bolt (1).

Tighten the bolt to 35 Nm (26 lb ft).




3. Install the battery negative extension cable ground bolt (1).

20 Nm (15 lb ft).

4. Install the front compartment side sight shield. Refer to Front Compartment Side Sight Shield Replacement .
5. Connect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection (Sedan,Wagon) Service and RepairBattery Negative Cable Disconnection and Connection (Coupe) Service and Repair.