Aisin AY6 - Manual Transmission

Transmission Fluid Level Inspection




1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle Service and Repair.
2. Clean any dirt from around the fill plug (1).
3. Remove the transmission fill plug (1) and washer (2) from the transmission.




4. Check that the transmission fluid level is even with the bottom of the fill plug hole.
5. Add transmission fluid, if necessary.




6. Inspect the fill plug washer (2) and replace if necessary.

Caution: Refer to Component Fastener Tightening Caution Component Fastener Tightening Caution.

7. Install the transmission fill plug (1) and washer (2) then tighten to 37 Nm (27 lb ft).
8. Lower the vehicle.