Front Side Door Window Belt Inner Sealing Strip Replacement (Sedan/Wagon)

Front Side Door Window Belt Inner Sealing Strip Replacement (Sedan/Wagon)

Removal Procedure




1. Lower the window to the full down position.
2. Remove the door trim panel. Refer to Front Side Door Trim Panel Replacement (Coupe) Front Side Door Trim Panel Replacement (Coupe)Front Side Door Trim Panel Replacement (Sedan, Wagon) Front Side Door Trim Panel Replacement (Sedan, Wagon).
3. Starting at one end of the window inner belt sealing strip, pull upward to release the strip.

Installation Procedure





Important: When reusing the inner belt sealing strip, the flange mounting area must be pinched together in order to counteract the splaying effect when removed. Use a thumb and an index finger to pinch the carrier (3) back together.


1. Install the sealing strip (1) to the door flange on the door inner panel.





Important: Do not distort the sealing strip.


2. Press downward to engage the sealing strip the entire length of the door.
3. Install the door trim panel. Refer to Front Side Door Trim Panel Replacement (Coupe) Front Side Door Trim Panel Replacement (Coupe)Front Side Door Trim Panel Replacement (Sedan, Wagon) Front Side Door Trim Panel Replacement (Sedan, Wagon).