Symptoms - Object Detection

Symptoms - Object Detection

Note: The following steps must be completed before using the symptom tables:

1. Perform the Diagnostic System Check - Vehicle Diagnostic System Check - Vehicle before using the Symptom Tables in order to verify that all of the following are true:

* There are no DTCs set.
* The control modules can communicate via the serial data link.

2. Review the system operation in order to familiarize yourself with the system functions. Refer to Object Detection Description and Operation (B3T) Object Detection (B3T)Object Detection Description and Operation (UD7) Object Detection (UD7)Object Detection Description and Operation (UVC) Object Detection (UVC)Object Detection Description and Operation (UFT) Object Detection (UFT).

Visual/Physical Inspection

* Inspect for aftermarket devices which may affect the operation of the system. Refer to Checking Aftermarket Accessories Checking Aftermarket Accessories.
* Inspect the easily accessible or visible system components for obvious damage or conditions which may cause the symptom.
* Make sure the parking assist sensors located on the rear bumper are clear. Remove any snow, mud or ice that is blocking the sensors.

Intermittent

Faulty electrical connections or wiring may be the cause of intermittent conditions. Refer to Testing for Intermittent Conditions and Poor Connections Testing for Intermittent Conditions and Poor Connections.

Symptom List

* Parking Assist System Malfunction Parking Assist System Malfunction
* Rear Vision Camera System Malfunction (without Navigational Radio) Rear Vision Camera System Malfunction (without Navigational Radio)Rear Vision Camera System Malfunction (with Navigational Radio) Rear Vision Camera System Malfunction (with Navigational Radio)
* Side Object Sensor Malfunction Side Object Sensor Malfunction