Transmission Support Adjustment (Manual)

Transmission Support Adjustment (Manual)











2.Support the transmission.

3.Loosen the four transmission support to body bolts.

4.Loosen the two mount to transmission tail cone bolts.

5.Reposition the transmission mount and support.

1Transmission Mount Bolt (Qty: 2)
Caution:Refer to Fastener Caution .


Procedure


Re-torque the two mount to transmission tail cone bolts first.

Note:Ensure transmission support is perpendicular to the driveline or parallel to the body.Tighten 60 N �m (44 lb ft)

2Transmission Support Bolt (Qty: 4)


Procedure


Re-torque the four transmission support to body bolts.
Tighten 60 N �m (44 lb ft)

3Transmission Support


Procedure


Inspect to make certain the vertical travel limiter is not binding against support.