Counter Gear Shaft Disassemble

Counter Gear Shaft Disassemble

Special Tools

* J 22912-B - Rear Pinion and Axle Bearing Remover

* J 39473 - Mainshaft Bearing Installer

* J 39511 - Split Plate

* J 39547 - Press Adapter

For equivalent regional tools, refer to Special Tools Special Tools and Equipment.

Note:
Do not replace tapered bearings unless inspection shows bearing damage.





1. Remove the countershaft front bearing, using the J 22912-B - remover (1) with the J 39473 - installer (2) and a hydraulic press.

2. Discard the countershaft front bearing.





3. Remove the countershaft rear bearing, using the J 39511 - plate (2), the J 39547 - adapter (1) and a hydraulic press.

4. Discard the countershaft rear bearing.