Limited Slip Differential Assemble

Limited Slip Differential Assemble

1. Clean sealant from the sealing surfaces and wash with a suitable degreaser. Refer to Adhesives, Fluids, Lubricants, and Sealers Fluid Type Specifications





2. Apply a bead of (1) Sealing adhesive to one sealing surface Refer to Adhesives, Fluids, Lubricants, and Sealers Fluid Type Specifications





Caution:
Refer to Fastener Caution Fastener Caution.

3. Fit the right-hand limited slip differential housing (2) using new bolts (1) and tighten to 45 Nm (33 lb ft).

4. Fit Complete unit, differential clutch and limited slip differential. Refer to Differential Carrier Assembly Replacement Differential Carrier Assembly Replacement

5. Fill the limited slip differential with oil, using a clean funnel and hose. The oil level should be below the hole. For oil type and volume refer to Adhesives, Fluids, Lubricants, and Sealers Fluid Type Specifications.

6. Fit the level plug with a new sealing washer and tighten to 25 Nm (18.4 lb ft).