Manifold Pressure/Vacuum Sensor: Service and Repair

MAP Sensor Mounting:

REMOVE OR DISASSEMBLE
1. Negative battery cable.
2. Resonator.
3. Electrical connector.
4. Hold down bolts (2).
5. Sensor from intake manifold.


INSTALL OR CONNECT
1. New sensor seal (lightly coated with clean engine oil).
2. Sensor into intake manifold.
3. Hold down bolts.

Tighten
Bolts to 6 Nm (50 lb. in).

4. Connect electrical connector.
5. Resonator.
6. Connect negative battery cable.