Front Caster and Camber Adjustment

^ Tool Required:
- J 38658 Camber/Caster Adjuster
- Or Equivalent

Adjust:
1. Jounce front bumper three times to allow vehicle to return to normal height before making any adjustments in caster.
2. Raise and suitably support vehicle.
3. Loosen front lower control arm nuts.
4. Install J 38658 to slot holes in lower control arm (3) and front crossmember (2).
5. Camber by rotating turnbuckle on J 38658.
^ Rotating turnbuckle clockwise will increase camber.
^ Rotating turnbuckle counterclockwise will decrease camber.
6. Install J 38658 to slot holes in lower control arm (3) and front crossmember (2).
7. Caster by rotating turnbuckle on J 38658.
^ Rotating turnbuckle clockwise will increase caster.
^ Rotating turnbuckle counterclockwise will decrease caster.
8. Remove J 38658 from slot holes.
9. Tighten front lower control arm nuts.
10. Lower vehicle.