Crankshaft, Engine

Main Journal
Diameter
Production: 64.993-65.007 mm (2.558-2.559 inches)
Service Limit (min): 64.983 mm (2.558 inches)
Out of Round
Production: 0.005 mm (0.0002 inch)
Service Limit: 0.020 mm (0.00078 inch)
Taper
Production: 0.005 mm (0.0002 inch)
Service Limit: 0.020 mm (0.00078 inch)
End Play: 0.040-0.2 mm (0.0015-0.0078 inch)
Runout (at Rear Flange): 0.05 mm (0.002 inch)


Connecting Rod Journal
Diameter
Production: 53.328 mm (2.099 inches)
Service Limit (min.): 53.308 mm (2.0987 inches)
Taper
Production [2]: 0.005 mm (0.002 inch)
Service Limit (max.): 0.020 mm (0.00078 inch)
Out of Round
Production: 0.0075 mm (0.0003 inch)
Service Limit: 0.020 mm (0.00078 inch)





[2] Maximum for 1/2 of Journal Length